Article #ETM633
Synopsis
This article explains the behavior of an ISDN PRI NFAS Member after issuing the ETM® Command T1 OFFLINE.
Versions Affected
All versions of the ETM® System are affected.
More Information
When the T1 OFFLINE command is issued to an ISDN PRI Span via the ASCII Management Interface or a Telnet/serial connection, the specified Span is set offline and no longer monitors calls or enforces its Policy; the Span acts as a passive pass-through device for call traffic.
However, if the Span is an NFAS Member, the D-channel information of the calls passing through the trunk is still captured by the primary D-channel (if online), and you will continue to see active calls in the Channel Monitor.
The Call Type for these calls is reported as Voice.
Last Updated
6/5/2003
SecureLogix Corporation 13750 San Pedro, Suite 230 San Antonio, Texas 78232 (210) 402-9669 www.securelogix.com
Support (877) SLC-4HELP EMAIL support@securelogix.com http://support.securelogix.com
http://story.news.yahoo.com/news? tmpl=story&cid=584&e=3&u=/nm/20040816/pl_nm/bush_military_dc
© Copyright 2003 SecureLogix Corporation. All Rights Reserved.
U.S. Patents No. US 6,249,575 B1 and US 6,320,948 B1.
U.S. and Foreign Patents Pending.