Knowledge Base Article #APP184
ETM® System digital telecom appliances only.
After the out-of-box configuration is complete, the Spans on the Controller Card restart offline
After an out-of-box configuration is complete, the Spans restart offline automatically so that you can configure them with the proper telephony settings before placing them inline.
To bring the Spans inline
- In the tree pane, right-click the Span, then click ASCII Management Interface. (You can multi-select Spans and open all of their ASCII Management Interfaces simultaneously.)
- In the Enter Command for Span box, type one of the following:T1 CAS or T1 PRI SpansT1 INLINEE1 SpansE1 INLINE
- Press ENTER. (You must do this separately for each Span selected.)
- In the Enter Command for Span box, type RESTART, then press ENTER.
Note: This information is also available in the Installing the ETM® System v4.1 user guide and online Help.
SecureLogix Corporation 13750 San Pedro, Suite 230 San Antonio, Texas 78232 (210) 402-9669 www.securelogix.com
Support (877) SLC-4HELP EMAIL email@example.com http://support.securelogix.com
ETM, SecureLogix, SecureLogix Corporation, TeleWatch Secure, TWSA, the ETM Emblem, the SecureLogix Diamond Emblem, and the ETM Application Suite Emblems are trademarks or registered trademarks of SecureLogix Corporation in the U.S.A. and other countries. All other trademarks mentioned herein are believed to be trademarks of their respective owners.
© Copyright 2004 SecureLogix Corporation. All Rights Reserved.
U.S. Patents No. US 6,249,575 B1, US 6,320,948 B1, US 6,542,592 B1, US 6,687,353 B1, and US 6,700,964 B1.
U.S. and Foreign Patents Pending.