Knowledge Base Article #APP218B
Synopsis
A controller card must be present in the system slot of the ETM® 3200 Appliance chassis for proper operation.
Versions Affected
ETM 3200 Appliance
More Information
Always install the first card set in the system slot (the bottom slot of the chassis). The controller card in this slot serves as the system controller for the unit. The system controller card controls communication on the compact PCI (cPCI) backplane, and parks the PCI bus when the bus is idle.
Note: Cards need not be continuously installed from the bottom up, but a card set MUST be present in the lowest slot. Hot-swapping the system controller card disables communication on the cPCI backplane during the time it is removed, but otherwise does not impair operation. Promptly replace the card.
Last Update:12/21/01
SecureLogix Corporation
13750 San Pedro, Suite 230 San Antonio, Texas 78232 (210) 402-9669 www.securelogix.com
Support (877) SLC-4HELP EMAIL support@securelogix.com http://support.securelogix.com
ETM, SecureLogix, SecureLogix Corporation, TeleWatch Secure, TWSA, the ETM Emblem, the SecureLogix Diamond Emblem, and the ETM Application Suite Emblems are trademarks or registered trademarks of SecureLogix Corporation in the U.S.A. and other countries. All other trademarks mentioned herein are believed to be trademarks of their respective owners.
© Copyright 2001 SecureLogix Corporation. All Rights Reserved.
U.S. Patents No. US 6,249,575 B1 and US 6,320,948 B1. U.S. and Foreign Patents Pending.
This product includes:
Data Encryption Standard Software developed by Eric Young (eay@mincom.oz.au)
© Copyright 1995 Eric Young. All Rights Reserved.
Style Report software owned and licensed exclusively by InetSoft Technology Corp.
© Copyright 1996-2000 InetSoft Technology Corp. All Rights Reserved.