“Attributes” Field in Policy has Invalid Value After Upgrade

Article #ETM956

Versions Affected

ETM^® System v5.0 – 5.0.2; fixed in 5.1

Symptom

When the ETM System is upgraded from version 4.1 to v5.0, the Attributes field is added to Voice Firewall Policies. The default value for the Attributes field is None; however, during the upgrade, Any is placed in the Attributes field for all existing Rules.

Description

The Attributes field is used to specify additional possible characteristics of VoIP calls to which you may want to apply the Firewall Policy. A value of Any in the Attributes field does not affect Policy processing; however, you can change it to None so that this field will match any new Rules that are created.

Solution

To change the Attributes field to None

1. Open the Firewall Policy editor.
2. Right-click the Attributes field of each Rule, then click None.
3. On the Performance Manager toolbar, click the Save icon.

Last Updated

08/23/2005

SecureLogix Corporation • 13750 San Pedro, Suite 230 • San Antonio, Texas 78232 • (210) 402-9669 • www.securelogix.com

Support (877) SLC-4HELP • EMAIL support@securelogix.com • http://support.securelogix.com

ETM, SecureLogix, SecureLogix Corporation, and the ETM, telecom firewall, usage manager, infrastructure manager, and call recorder Emblems and the SecureLogix Diamond Emblem are trademarks or registered trademarks of SecureLogix Corporation in the U.S.A. and other countries. All other trademarks mentioned herein are believed to be trademarks of their respective owners.

© Copyright 2005 SecureLogix Corporation. All Rights Reserved.

U.S. Patents No. US 6,249,575 B1, US 6,320,948 B1, US 6,542,421 B2, US 6,687,353 B1, US 6,718,024 B1,
US 6,735,291 B1, US 6,760,420 B2, US 6,700,964 B2, US 6,879,671B2 and CA 2,354,149.
U.S. and Foreign Patents Pending.