#ETM67716 The attached document contains important information about release v11.1.0 of the ETM® System. The ETM System includes the ETM Communications Applications and software, Application Appliances, ETM Server software, and the ETM applications: the Performance Manager, the Voice Firewall, the Usage Manager, the Voice IPS (Intrusion Prevention System), and the...

Article #APP2597 The attached article contains important information about UTA Appliance Build 11.0-128. See the attachment for details.

Article #APP2596 The attached document contains important information about release 11.0 of the ETM® UTA Appliance. To use this Appliance, you must have v9.0 or later of the ETM Management Server installed. See the attachment for details.

Article #APP2592 SecureLogix recently learned that Cisco is aware of active exploitation of a previously unknown vulnerability in the web UI feature of Cisco IOS XE Software when exposed to the Internet or to untrusted networks. The SecureLogix UTA Appliance requires the web UI feature in Cisco IOS XE software...

Article #APP862 Both CUBE and UTA were presenting a problematic disconnect causecode, regardless of the disconnect reason provided through the API. The attacheddocument describes the issue and its resolution. Click Download for more Details:

Article #ETM5401 ETM® Unified Trunking Application (UTA ) and inline SIP applicationsprovide a Call Inactivity Timeout setting to clear ghost calls from the system(those which connected but for which the ETM System did not see an end, and for whichno activity has been seen during the specified amount of time)....

Article #ETM013 The attached article provides important information about v7.1.0 ofthe ETM® System. Click Download for more Details:

Article #ETM367 Versions Affected All versions of the ETM® Unified Trunk Application (UTA). Issue A limitation exists in the Cisco Unified Communication IOS Services API (CUCISAPI)that supports UTA that impacts how dial peers can be configured when using the API. Description When a call comes in, the CUCISAPI runs a...

Article #ETM998 ETM® System v7.1.1 Appliance Build 50 provides appliance package updates to resolvethe issues listed below for inline SIP and UTA appliance software. Before installingthis update, you must have v7.1.1 installed on the ETM Management Server. See theattached article for details. Click Download for more Details:

Article #ETM676 The attached article details configuring IPSec between a UTA Appliance Instance andthe ISR G2/ASR. Click Download for more Details:

Article #INS8591 The attached document describes installation and configuration of the ETM(R) UnifiedTrunk Application (UTA) available in version 7.0.0 and later of the ETM System, foruse in conjunction with a properly provisioned Cisco ISR G2. Click Download for more Details:

Article #ETM9141 The attached article contains important information about v7.0.1 of the ETM® System. Click Download for more Details:

Article #ETM537 The attached document includes important information about Release 7.0.0 of the ETMSystem. Click Download for more Details:

Article #ETM500 The attached document contains important information about v7.0.0 Update 1. Thisupdate is intended for customers using the inline SIP or UTA applications with v7.0.0of the ETM System on the 5000 series ETM Appliance or the SRE module in a Cisco ISRG2. This update addresses issues with call termination...